Chimney Services Port Barrington IL

We are your one stop Port Barrington chimney shop!

  • We eliminate the guesswork. And provide our customers cutting edge Port Barrington chimney repair technology.
  • We are clean.  And ensure our footwear never touches your floors. Our industrial vacuums collect the dust before it gets into your home while our trained technician sweeps and inspects the chimney flue.
  • You are safe!  We document every job with before and after photos, and the lead technician on the job is always certified.  We also test for excess levels of carbon monoxide at no additional cost to you. Our Port Barrington company is about making your home safe.

We begin with a Port Barrington chimney inspection—which is one of the most important chimney services we offer, and one of the most misunderstood. The inspection determines the status of your chimney. We have created a page where specifics are listed.  We are CSIA certified.

Instructions For Cleaning and Fixing a Chimney

Chimney Cleaning Near Me

Our CSIA-Certified Chimney Sweeps use state-of-the-art equipment to inspect and sweep 1st- and 2nd-story chimneys of all kinds, including oil-, wood-, and gas-burning chimneys. While sweeping your system, we ensure that it is in working order. We look for any problems that could prevent peak performance and recommend what is needed for your system to burn cleanly and safely. When necessary, we use video inspection camera equipment to examine hidden parts of the flue.

Steps

1. Before starting working on a chimney, make certain that the fire has long burned out.

2. The first thing you need to do is to measure the interior diameter of the metal or prefabricated chimney by removing the chimney cap with measuring tape. In case you have masonry chimney design, gauge the length and width of the flue liner. Take a moderate length chimney brush according to the calculated measures. The brush should neither be too small nor too large.

3. Stiff bristled brush and rods are ideal for chimney cleaning. These are easily available at any hardware stores.

4. To prevent ash or soot escaping into the room, use duct tape or masking tape to attach the cloth or sheet to the fireplace opening.

5. Change your clothes and climb up to the roof top. Don't forget to keep your chimney rods, flashlight and brush with you before climbing on the roof. Wear goggles and breathing mask as well.

6. If your chimney contains cap, remove it and clean it with the brush.

7. Attach few rods with brush and put it inside the chimney. Keep adding rods until you feel that the brush is touching the damper assembly.

8. Now you are ready to clean the flue. Move brush in up and down direction and scrape it against the walls of the chimney. Remove all the creosote (in form of ash, soot or as black shiny hardened gaze or a black crunchy substance).

9. Clean the whole length of the chimney in the same way. Afterwards take a flashlight and examine the chimney for any signs of creosote.

10. If you find chimney clean from the top side, come down and proceed to clean the chimney from inside the home. Remove the sheet or cloth you attach before. Keep a drop cloth on the site where your will have to work. Clean the damper assembly and the side walls of the chimney with brush. Examine any remaining of the creosote with flashlight.

11. Now clean the surrounding of the fireplace with vacuum or simply sweep it with broom. Remove the drop cloth carefully. Now is the time to rub your equipment clean from creosote. Remove your goggles and breathing mask. Place the equipment at its storage place for future cleaning.

12. Don't forget to inspect your chimney for any damage signs while cleaning process. If you find any, consult professionals.

13. If mortar is loose or damage, clear it and apply new mortar on the surface. Cracks can also be filled with mortar. It is recommended to use weather resistant mortar to give long life to your chimney.

14. Inspect the flashing seals for any damage. Use caulk to prevent any leakage, especially at the joints between chimney and flashing.

Precautions

- Always use breathing mask and eye safety goggles while working on chimney.
- Be careful about the surroundings while working on the roof top.

Steps

1. Before starting working on a chimney, make certain that the fire has long burned out.

2. The first thing you need to do is to measure the interior diameter of the metal or prefabricated chimney by removing the chimney cap with measuring tape. In case you have masonry chimney design, gauge the length and width of the flue liner. Take a moderate length chimney brush according to the calculated measures. The brush should neither be too small nor too large.

3. Stiff bristled brush and rods are ideal for chimney cleaning. These are easily available at any hardware stores.

4. To prevent ash or soot escaping into the room, use duct tape or masking tape to attach the cloth or sheet to the fireplace opening.

5. Change your clothes and climb up to the roof top. Don't forget to keep your chimney rods, flashlight and brush with you before climbing on the roof. Wear goggles and breathing mask as well.

6. If your chimney contains cap, remove it and clean it with the brush.

7. Attach few rods with brush and put it inside the chimney. Keep adding rods until you feel that the brush is touching the damper assembly.

8. Now you are ready to clean the flue. Move brush in up and down direction and scrape it against the walls of the chimney. Remove all the creosote (in form of ash, soot or as black shiny hardened gaze or a black crunchy substance).

9. Clean the whole length of the chimney in the same way. Afterwards take a flashlight and examine the chimney for any signs of creosote.

10. If you find chimney clean from the top side, come down and proceed to clean the chimney from inside the home. Remove the sheet or cloth you attach before. Keep a drop cloth on the site where your will have to work. Clean the damper assembly and the side walls of the chimney with brush. Examine any remaining of the creosote with flashlight.

11. Now clean the surrounding of the fireplace with vacuum or simply sweep it with broom. Remove the drop cloth carefully. Now is the time to rub your equipment clean from creosote. Remove your goggles and breathing mask. Place the equipment at its storage place for future cleaning.

12. Don't forget to inspect your chimney for any damage signs while cleaning process. If you find any, consult professionals.

13. If mortar is loose or damage, clear it and apply new mortar on the surface. Cracks can also be filled with mortar. It is recommended to use weather resistant mortar to give long life to your chimney.

14. Inspect the flashing seals for any damage. Use caulk to prevent any leakage, especially at the joints between chimney and flashing.

Precautions

- Always use breathing mask and eye safety goggles while working on chimney.
- Be careful about the surroundings while working on the roof top.

Take Care of Small Chimney Repairs

Chimney Contractors Near Me

Masonry and Tuckpointing is often called to repair chimneys of historic structures common in Chicago. Older chimneys were built for the high heat of coal burning. These coal-burning heavy-duty chimneys are not ideal for today’s use of gas for heating and lead to increased water condensation and resulting damage including chimney cracks and leaks. Older structures and their chimneys often make it difficult to properly match the color of brick and mortar with today's materials. We have the experience and know-how to do it right.

When you get lots of moisture in a chimney, the water's solvent properties go to work on the water, concrete and bricks, slowing removing one particle at a time until you have fissures, and eventually, cracks, especially if you don't have a flue liner or other flue protection. If you're getting heavy use out of a chimney, you'll speed up the deterioration process.

You have a high-energy efficiency furnace. Today's high-efficiency furnaces save you money, but they also put a lot more moisture in the flue air than yesterday's lower-efficiency ones. All that moisture, again, increases the wear-and-tear on your chimney and flue.

You have an oil or gas furnace. In these cases, the problem is acid. Acidic vapors from burning gas and oil build up a residue and that eats away at your chimney from the inside out. This can cause cracks in the clay lining, especially, and leave you with potentially expensive repairs.


Illinois Chimney Services

Home

Chimney Services Port Barrington IL

We are your one stop Port Barrington chimney shop!

  • We eliminate the guesswork. And provide our customers cutting edge Port Barrington chimney repair technology.
  • We are clean.  And ensure our footwear never touches your floors. Our industrial vacuums collect the dust before it gets into your home while our trained technician sweeps and inspects the chimney flue.
  • You are safe!  We document every job with before and after photos, and the lead technician on the job is always certified.  We also test for excess levels of carbon monoxide at no additional cost to you. Our Port Barrington company is about making your home safe.

We begin with a Port Barrington chimney inspection—which is one of the most important chimney services we offer, and one of the most misunderstood. The inspection determines the status of your chimney. We have created a page where specifics are listed.  We are CSIA certified.

Fixing Your Leaning Chimney Properly

Chimney Crown Crack

Our CSIA-Certified Chimney Sweeps use state-of-the-art equipment to inspect and sweep 1st- and 2nd-story chimneys of all kinds, including oil-, wood-, and gas-burning chimneys. While sweeping your system, we ensure that it is in working order. We look for any problems that could prevent peak performance and recommend what is needed for your system to burn cleanly and safely. When necessary, we use video inspection camera equipment to examine hidden parts of the flue.

Your fireplace offers cozy warmth to heat your home in winter, but did you realize that it can also be very dangerous to your home and family? Cracked linings, deteriorating mortar, and creosote buildup are all common problems that can lead to health and fire hazards. These problems may be hidden from your casual glance, but a thorough inspection by a professional chimney sweeper will reveal these issues. That's why annual chimney inspections are so important. With prompt repair, you can get your fireplace back in great working order and enjoy it safely for years to come!

Chimney Inspection

An inspection is a simple, noninvasive visual assessment of the key elements of your fireplace and flue system. We recommend having a chimney inspection as part of your annual cleaning. Your chimney sweep will check for cracks, deterioration, or other problems with the flue, crown, brick, mortar, and flashing as well as the firebox and damper. Sometimes a video inspection is conducted to ensure there are no problems in hard-to-see areas. If problems are detected, it is important to have them addressed promptly. Issues involving cracks, mortar, and weather-based damage will get worse the longer they are left uncorrected.

Types of Chimney Rebuilds

Chimney Cleaning Service Near Me

We have over 40-years of experience in chimney cleanings, inspections, troubleshooting, masonry, venting, water intrusion, and animal control. Our company employs best practices for chimney lining, chimney rebuilding, cap and damper installations, gas logs, refinishing, furnace and hot water venting. Call today to schedule your appointment!


Illinois Chimney Services

Home