We are your one stop Warren chimney shop!
- We eliminate the guesswork. And provide our customers cutting edge Warren chimney repair technology.
- We are clean. And ensure our footwear never touches your floors. Our industrial vacuums collect the dust before it gets into your home while our trained technician sweeps and inspects the chimney flue.
- You are safe! We document every job with before and after photos, and the lead technician on the job is always certified. We also test for excess levels of carbon monoxide at no additional cost to you. Our Warren company is about making your home safe.
We begin with a Warren chimney inspection—which is one of the most important chimney services we offer, and one of the most misunderstood. The inspection determines the status of your chimney. We have created a page where specifics are listed. We are CSIA certified.
Top Five Things To Look For When Hiring A Chimney Sweep
1. Before starting working on a chimney, make certain that the fire has long burned out.
2. The first thing you need to do is to measure the interior diameter of the metal or prefabricated chimney by removing the chimney cap with measuring tape. In case you have masonry chimney design, gauge the length and width of the flue liner. Take a moderate length chimney brush according to the calculated measures. The brush should neither be too small nor too large.
3. Stiff bristled brush and rods are ideal for chimney cleaning. These are easily available at any hardware stores.
4. To prevent ash or soot escaping into the room, use duct tape or masking tape to attach the cloth or sheet to the fireplace opening.
5. Change your clothes and climb up to the roof top. Don't forget to keep your chimney rods, flashlight and brush with you before climbing on the roof. Wear goggles and breathing mask as well.
6. If your chimney contains cap, remove it and clean it with the brush.
7. Attach few rods with brush and put it inside the chimney. Keep adding rods until you feel that the brush is touching the damper assembly.
8. Now you are ready to clean the flue. Move brush in up and down direction and scrape it against the walls of the chimney. Remove all the creosote (in form of ash, soot or as black shiny hardened gaze or a black crunchy substance).
9. Clean the whole length of the chimney in the same way. Afterwards take a flashlight and examine the chimney for any signs of creosote.
10. If you find chimney clean from the top side, come down and proceed to clean the chimney from inside the home. Remove the sheet or cloth you attach before. Keep a drop cloth on the site where your will have to work. Clean the damper assembly and the side walls of the chimney with brush. Examine any remaining of the creosote with flashlight.
11. Now clean the surrounding of the fireplace with vacuum or simply sweep it with broom. Remove the drop cloth carefully. Now is the time to rub your equipment clean from creosote. Remove your goggles and breathing mask. Place the equipment at its storage place for future cleaning.
12. Don't forget to inspect your chimney for any damage signs while cleaning process. If you find any, consult professionals.
13. If mortar is loose or damage, clear it and apply new mortar on the surface. Cracks can also be filled with mortar. It is recommended to use weather resistant mortar to give long life to your chimney.
14. Inspect the flashing seals for any damage. Use caulk to prevent any leakage, especially at the joints between chimney and flashing.
- Always use breathing mask and eye safety goggles while working on chimney.
- Be careful about the surroundings while working on the roof top.
Chimney fire is usually caused due to the improper cleaning and maintenance of the chimney. For better and safe chimney functions it is better to clean the chimney thoroughly once in a year, especially before winter season comes. Chimney cleaning is not a tough task; you can do it with little effort. However, you can take help of some professional chimney sweep.
- Breathing mask
- Chimney brush and chimney rods
- Drop cloths or old sheets
- Duct tape or masking tape
- Measuring tape
- Old clothes
- Small mirror
- Sweeping brush and pan or vacuum
- Weather-resistant mortar
Why Chimney Repairs Are Important
Cracks, leaks, and other problems can lead to house fires, carbon monoxide poisoning, and potentially dangerous situations, so it's important to follow up your chimney inspection with all necessary repairs. Chimney repair is always a job for professionals, so be sure that you use a qualified technician for complete, correct repair to keep your house and family safe. Common repairs include brick repointing, relining, and cap installation.
Repointing and Brickwork Repair: If the mortar in your chimney is eroding, it needs to be repointed. The mortar is essentially the glue holding the bricks in place, so if it begins to deteriorate, the bricks are no longer solidly held together--your chimney may crumble or collapse! Repointing ensures that the bricks remain in place and your chimney's structure stays sturdy. Missing or broken bricks should also be replaced to keep it looking and working great. Mortar repointing and brick repair not only address aesthetic issues, but they can also resolve chimney leaks and prevent deterioration.
Relining: Many older chimneys are lined with fireproof tiles or clay, but these materials can crack because of chimney fires and other problems. Once cracked, your liner can no longer do its job of protecting your chimney from extreme heat and preventing carbon monoxide leakage. This tile or clay liner should be replaced with a modern stainless steel lining for optimum protection.