We are your one stop Winthrop Harbor chimney shop!
- We eliminate the guesswork. And provide our customers cutting edge Winthrop Harbor chimney repair technology.
- We are clean. And ensure our footwear never touches your floors. Our industrial vacuums collect the dust before it gets into your home while our trained technician sweeps and inspects the chimney flue.
- You are safe! We document every job with before and after photos, and the lead technician on the job is always certified. We also test for excess levels of carbon monoxide at no additional cost to you. Our Winthrop Harbor company is about making your home safe.
We begin with a Winthrop Harbor chimney inspection—which is one of the most important chimney services we offer, and one of the most misunderstood. The inspection determines the status of your chimney. We have created a page where specifics are listed. We are CSIA certified.
Our Chimney Sweep and Cleaning Services
Chimney fire is usually caused due to the improper cleaning and maintenance of the chimney. For better and safe chimney functions it is better to clean the chimney thoroughly once in a year, especially before winter season comes. Chimney cleaning is not a tough task; you can do it with little effort. However, you can take help of some professional chimney sweep.
- Breathing mask
- Chimney brush and chimney rods
- Drop cloths or old sheets
- Duct tape or masking tape
- Measuring tape
- Old clothes
- Small mirror
- Sweeping brush and pan or vacuum
- Weather-resistant mortar
Chimney Restoration and Repair
The most common cause of chimney related roof leaks is the chimney flashing. In fact, if you have a roof leak in the vicinity of the chimney, it is most likely the flashing. Chimney flashing is a 6 to 8 inch metal strip (usually lead or aluminum) used to seal the transition joint between the shingles and the chimney.
In some cases the chimney flashing was never installed, installed improperly or over time has deteriorated. Seasonal heating and cooling can cause flashing joints to break and open the water tight seal. The "old technology" method of repairing chimney flashing used a tar based material over the suspected leaking areas.
Unfortunately, the tar material for flashing repair is only a short term patch. All tar based chimney flashing patching compounds are not UV stable, and over time they degrade and crack on the roof. This either opens the old leaking areas or allows new leaks to form.
Cracks, leaks, and other problems can lead to house fires, carbon monoxide poisoning, and potentially dangerous situations, so it's important to follow up your chimney inspection with all necessary repairs. Chimney repair is always a job for professionals, so be sure that you use a qualified technician for complete, correct repair to keep your house and family safe. Common repairs include brick repointing, relining, and cap installation.
Repointing and Brickwork Repair: If the mortar in your chimney is eroding, it needs to be repointed. The mortar is essentially the glue holding the bricks in place, so if it begins to deteriorate, the bricks are no longer solidly held together--your chimney may crumble or collapse! Repointing ensures that the bricks remain in place and your chimney's structure stays sturdy. Missing or broken bricks should also be replaced to keep it looking and working great. Mortar repointing and brick repair not only address aesthetic issues, but they can also resolve chimney leaks and prevent deterioration.
Relining: Many older chimneys are lined with fireproof tiles or clay, but these materials can crack because of chimney fires and other problems. Once cracked, your liner can no longer do its job of protecting your chimney from extreme heat and preventing carbon monoxide leakage. This tile or clay liner should be replaced with a modern stainless steel lining for optimum protection.