Chimney Services Wheeling IL

We are your one stop Wheeling chimney shop!

  • We eliminate the guesswork. And provide our customers cutting edge Wheeling chimney repair technology.
  • We are clean.  And ensure our footwear never touches your floors. Our industrial vacuums collect the dust before it gets into your home while our trained technician sweeps and inspects the chimney flue.
  • You are safe!  We document every job with before and after photos, and the lead technician on the job is always certified.  We also test for excess levels of carbon monoxide at no additional cost to you. Our Wheeling company is about making your home safe.

We begin with a Wheeling chimney inspection—which is one of the most important chimney services we offer, and one of the most misunderstood. The inspection determines the status of your chimney. We have created a page where specifics are listed.  We are CSIA certified.

Reasons to Reline Your Chimney

Chimney Inspections

Steps

1. Before starting working on a chimney, make certain that the fire has long burned out.

2. The first thing you need to do is to measure the interior diameter of the metal or prefabricated chimney by removing the chimney cap with measuring tape. In case you have masonry chimney design, gauge the length and width of the flue liner. Take a moderate length chimney brush according to the calculated measures. The brush should neither be too small nor too large.

3. Stiff bristled brush and rods are ideal for chimney cleaning. These are easily available at any hardware stores.

4. To prevent ash or soot escaping into the room, use duct tape or masking tape to attach the cloth or sheet to the fireplace opening.

5. Change your clothes and climb up to the roof top. Don't forget to keep your chimney rods, flashlight and brush with you before climbing on the roof. Wear goggles and breathing mask as well.

6. If your chimney contains cap, remove it and clean it with the brush.

7. Attach few rods with brush and put it inside the chimney. Keep adding rods until you feel that the brush is touching the damper assembly.

8. Now you are ready to clean the flue. Move brush in up and down direction and scrape it against the walls of the chimney. Remove all the creosote (in form of ash, soot or as black shiny hardened gaze or a black crunchy substance).

9. Clean the whole length of the chimney in the same way. Afterwards take a flashlight and examine the chimney for any signs of creosote.

10. If you find chimney clean from the top side, come down and proceed to clean the chimney from inside the home. Remove the sheet or cloth you attach before. Keep a drop cloth on the site where your will have to work. Clean the damper assembly and the side walls of the chimney with brush. Examine any remaining of the creosote with flashlight.

11. Now clean the surrounding of the fireplace with vacuum or simply sweep it with broom. Remove the drop cloth carefully. Now is the time to rub your equipment clean from creosote. Remove your goggles and breathing mask. Place the equipment at its storage place for future cleaning.

12. Don't forget to inspect your chimney for any damage signs while cleaning process. If you find any, consult professionals.

13. If mortar is loose or damage, clear it and apply new mortar on the surface. Cracks can also be filled with mortar. It is recommended to use weather resistant mortar to give long life to your chimney.

14. Inspect the flashing seals for any damage. Use caulk to prevent any leakage, especially at the joints between chimney and flashing.

Precautions

- Always use breathing mask and eye safety goggles while working on chimney.
- Be careful about the surroundings while working on the roof top.

You live in an area with a rapid freeze-thaw cycle and you use the fireplace intermittently. This especially true for wood-burning fireplaces. The biggest culprit is moisture. What starts out as water vapor becomes tiny droplets of water. These droplets settle into fissures in your chimney - and freeze if when the temperature drops and you're not using your fireplace.

Then, since it's gotten cold again, you fire up the fireplace, and melt that water. The next day you decide not to have a fire - and the water freezes into those fissures, spreading them open like a pair of pliers. A couple of winters of this, and you have a real problem.

You live in an area that's just plain cold. Long, cold winters also put heavy wear-and-tear on the chimney. Again, moisture is the problem. Water is called the "universal solvent" for a reason - it'll dissolve anything given enough time. Look at the Grand Canyon.

Does Your Chimney Need to Be Repaired?

Chimney Inspections

Your fireplace offers cozy warmth to heat your home in winter, but did you realize that it can also be very dangerous to your home and family? Cracked linings, deteriorating mortar, and creosote buildup are all common problems that can lead to health and fire hazards. These problems may be hidden from your casual glance, but a thorough inspection by a professional chimney sweeper will reveal these issues. That's why annual chimney inspections are so important. With prompt repair, you can get your fireplace back in great working order and enjoy it safely for years to come!

Chimney Inspection

An inspection is a simple, noninvasive visual assessment of the key elements of your fireplace and flue system. We recommend having a chimney inspection as part of your annual cleaning. Your chimney sweep will check for cracks, deterioration, or other problems with the flue, crown, brick, mortar, and flashing as well as the firebox and damper. Sometimes a video inspection is conducted to ensure there are no problems in hard-to-see areas. If problems are detected, it is important to have them addressed promptly. Issues involving cracks, mortar, and weather-based damage will get worse the longer they are left uncorrected.


Illinois Chimney Services

Home