Chimney Services Wauconda IL

We are your one stop Wauconda chimney shop!

  • We eliminate the guesswork. And provide our customers cutting edge Wauconda chimney repair technology.
  • We are clean.  And ensure our footwear never touches your floors. Our industrial vacuums collect the dust before it gets into your home while our trained technician sweeps and inspects the chimney flue.
  • You are safe!  We document every job with before and after photos, and the lead technician on the job is always certified.  We also test for excess levels of carbon monoxide at no additional cost to you. Our Wauconda company is about making your home safe.

We begin with a Wauconda chimney inspection—which is one of the most important chimney services we offer, and one of the most misunderstood. The inspection determines the status of your chimney. We have created a page where specifics are listed.  We are CSIA certified.

Top Five Things To Look For When Hiring A Chimney Sweep

How To Make Chimney Crown

Steps

1. Before starting working on a chimney, make certain that the fire has long burned out.

2. The first thing you need to do is to measure the interior diameter of the metal or prefabricated chimney by removing the chimney cap with measuring tape. In case you have masonry chimney design, gauge the length and width of the flue liner. Take a moderate length chimney brush according to the calculated measures. The brush should neither be too small nor too large.

3. Stiff bristled brush and rods are ideal for chimney cleaning. These are easily available at any hardware stores.

4. To prevent ash or soot escaping into the room, use duct tape or masking tape to attach the cloth or sheet to the fireplace opening.

5. Change your clothes and climb up to the roof top. Don't forget to keep your chimney rods, flashlight and brush with you before climbing on the roof. Wear goggles and breathing mask as well.

6. If your chimney contains cap, remove it and clean it with the brush.

7. Attach few rods with brush and put it inside the chimney. Keep adding rods until you feel that the brush is touching the damper assembly.

8. Now you are ready to clean the flue. Move brush in up and down direction and scrape it against the walls of the chimney. Remove all the creosote (in form of ash, soot or as black shiny hardened gaze or a black crunchy substance).

9. Clean the whole length of the chimney in the same way. Afterwards take a flashlight and examine the chimney for any signs of creosote.

10. If you find chimney clean from the top side, come down and proceed to clean the chimney from inside the home. Remove the sheet or cloth you attach before. Keep a drop cloth on the site where your will have to work. Clean the damper assembly and the side walls of the chimney with brush. Examine any remaining of the creosote with flashlight.

11. Now clean the surrounding of the fireplace with vacuum or simply sweep it with broom. Remove the drop cloth carefully. Now is the time to rub your equipment clean from creosote. Remove your goggles and breathing mask. Place the equipment at its storage place for future cleaning.

12. Don't forget to inspect your chimney for any damage signs while cleaning process. If you find any, consult professionals.

13. If mortar is loose or damage, clear it and apply new mortar on the surface. Cracks can also be filled with mortar. It is recommended to use weather resistant mortar to give long life to your chimney.

14. Inspect the flashing seals for any damage. Use caulk to prevent any leakage, especially at the joints between chimney and flashing.

Precautions

- Always use breathing mask and eye safety goggles while working on chimney.
- Be careful about the surroundings while working on the roof top.

- Brick Replacement - At times, bricks start to spall due to age and water exposure for prolonged periods. Severely deteriorated bricks can cause a major threat to the structure. A proficient contractor can replace these bricks, strengthening the structure and match the external color to give it a revitalizing fresh look.

- Masonry Color Matching - This is the most important aspect after any restoration work. The overall apprehension about your house begins with appearance and an expert contractor can match color with creativity and keep your place fresh and immaculate. Ideally the color matching should conceal the restoration signs and must offer a unanimous appearance to the structure. This feature becomes very critical during repairs and restoration of heritage structures with historical importance.

There are other more comprehensive methods of repairing a leaning flue which include totally rebuilding the chimney and reconstructing the fireplace. The pros and cons of each option should be thoroughly considered by people that are looking for ways to effectively fix the problem of a leaning flue on a permanent basis.

In all, the method that one chooses to fix a leaning vent is very important for long lasting results. When dealing with structural issues with a home, it is always best to consult with licensed, professional companies that will be able to provide valuable, reliable advice regarding leaning chimney repair.

All About Chimney Repairs and Concrete Restoration

How Chimney Sweep

You live in an area with a rapid freeze-thaw cycle and you use the fireplace intermittently. This especially true for wood-burning fireplaces. The biggest culprit is moisture. What starts out as water vapor becomes tiny droplets of water. These droplets settle into fissures in your chimney - and freeze if when the temperature drops and you're not using your fireplace.

Then, since it's gotten cold again, you fire up the fireplace, and melt that water. The next day you decide not to have a fire - and the water freezes into those fissures, spreading them open like a pair of pliers. A couple of winters of this, and you have a real problem.

You live in an area that's just plain cold. Long, cold winters also put heavy wear-and-tear on the chimney. Again, moisture is the problem. Water is called the "universal solvent" for a reason - it'll dissolve anything given enough time. Look at the Grand Canyon.

A chimney is probably one of the most ignored and poorly maintained structures on a home mainly because of lack of access and most people have a fear of heights.

Things to watch for if your chimney is having problems is crumbling mortar joints, cracked or broken brick, a cracked or missing crown on top of the chimney, a leaning chimney(which is really bad) and water damage inside your home around the chimney. You should contact a chimney repair or mason contractor to fix your chimney problems.

But if you are up to the challenge here is what you will need to do, first depending on how bad it is most chimney problems can be fixed with a little chimney tuckpointing. You will first need a good grinder, not a cheap $20 on either, buy a dewalt or hitatchi for about $120.00 then you will also need a good diamond 4 inch wheel to go on it, they will run you about $65.00.

Start by grinding out every mortar joint as deep as you can get the blade in, be sure to wear safety glasses and a mask if not you will regret it later. After all the joints have been ground out take your brush and clean out all the joints thoroughly. Now you will need to mix your mortar, after it is mixed it is easiest to use a grout bag to fill the joints, which resembles a large cake decorating bag if you dont know what one is. Be sure you mix is fluid enough to flow through bag but not too wet where it has no body or else you will have a huge mess on your hands. Depending on temperature you have to check your joints frequently to see if they are ready to be struck with a striking iron or a rake.

After you have struck or raked your joints brush them down to remove loose mortar and clean up the chimney. Next check the concrete cap, if it is cracked then it should be replaced and a new one should be poured in its place that is alteast 4 inches thick. After that task is completed check the chimney flashing and be sure it is installed correctly and is hole and crack free or it may need to be caulked up or replaced. Then clean up your roof with a broom or hose but if using water try not to spray your chimney till its dry.

That's pretty much how a brick tuckpointing job is done for an existing chimney, if you are unsure of any of the above task you really should have a mason contractor do the work for you.


Illinois Chimney Services

Home