Chimney Services Aptakisic IL

We are your one stop Aptakisic chimney shop!

  • We eliminate the guesswork. And provide our customers cutting edge Aptakisic chimney repair technology.
  • We are clean.  And ensure our footwear never touches your floors. Our industrial vacuums collect the dust before it gets into your home while our trained technician sweeps and inspects the chimney flue.
  • You are safe!  We document every job with before and after photos, and the lead technician on the job is always certified.  We also test for excess levels of carbon monoxide at no additional cost to you. Our Aptakisic company is about making your home safe.

We begin with a Aptakisic chimney inspection—which is one of the most important chimney services we offer, and one of the most misunderstood. The inspection determines the status of your chimney. We have created a page where specifics are listed.  We are CSIA certified.

Top Five Things To Look For When Hiring A Chimney Sweep

Chimney Company

There are other more comprehensive methods of repairing a leaning flue which include totally rebuilding the chimney and reconstructing the fireplace. The pros and cons of each option should be thoroughly considered by people that are looking for ways to effectively fix the problem of a leaning flue on a permanent basis.

In all, the method that one chooses to fix a leaning vent is very important for long lasting results. When dealing with structural issues with a home, it is always best to consult with licensed, professional companies that will be able to provide valuable, reliable advice regarding leaning chimney repair.

What causes cracks in your chimney and chimney flue? The answer matters -- if you don't think your chimney will develop cracks, you won't keep an eye out for them. And then you won't have the opportunity to make a quick repair before a small problem grows into a big one. That "big problem" can range from expensive repointing/brick replacement to dangerous gases leaking into your home, threatening the health of you and your family.

Here are five signs you have increased risk for chimney cracks:

The most common cause of chimney related roof leaks is the chimney flashing. In fact, if you have a roof leak in the vicinity of the chimney, it is most likely the flashing. Chimney flashing is a 6 to 8 inch metal strip (usually lead or aluminum) used to seal the transition joint between the shingles and the chimney.

In some cases the chimney flashing was never installed, installed improperly or over time has deteriorated. Seasonal heating and cooling can cause flashing joints to break and open the water tight seal. The "old technology" method of repairing chimney flashing used a tar based material over the suspected leaking areas.

Unfortunately, the tar material for flashing repair is only a short term patch. All tar based chimney flashing patching compounds are not UV stable, and over time they degrade and crack on the roof. This either opens the old leaking areas or allows new leaks to form.

Roofing, Flashings, and Chimneys

Chimney Restoration

There are other more comprehensive methods of repairing a leaning flue which include totally rebuilding the chimney and reconstructing the fireplace. The pros and cons of each option should be thoroughly considered by people that are looking for ways to effectively fix the problem of a leaning flue on a permanent basis.

In all, the method that one chooses to fix a leaning vent is very important for long lasting results. When dealing with structural issues with a home, it is always best to consult with licensed, professional companies that will be able to provide valuable, reliable advice regarding leaning chimney repair.

When you get lots of moisture in a chimney, the water's solvent properties go to work on the water, concrete and bricks, slowing removing one particle at a time until you have fissures, and eventually, cracks, especially if you don't have a flue liner or other flue protection. If you're getting heavy use out of a chimney, you'll speed up the deterioration process.

You have a high-energy efficiency furnace. Today's high-efficiency furnaces save you money, but they also put a lot more moisture in the flue air than yesterday's lower-efficiency ones. All that moisture, again, increases the wear-and-tear on your chimney and flue.

You have an oil or gas furnace. In these cases, the problem is acid. Acidic vapors from burning gas and oil build up a residue and that eats away at your chimney from the inside out. This can cause cracks in the clay lining, especially, and leave you with potentially expensive repairs.


Illinois Chimney Services

Home